3D Printing

3D printing is rewarding, print of a 3D model, one layer at a time by printing over the same area repeatedly dose take some time, but it’s actually a great hobby with a range of advantages.

My first printer

Dremel 3D20 Idea Builder 3D Printer, there are much better printers, I made my own Internal filament holder so it can use other brands of filament and larger reals to make it more cost-effective to use. Simplify3D PC sofware was worth getting and was a good idea for this pinter it gave it give better design options and more file formats can be used.

My Printer

Creality Ender 6 is a semi-enclosed Core XY machine with a build volume of 250 x 250 x 400 mm, it can print at 150 millimeters per second with a resolution of 0.1 millimeters, it’s about 3X faster and prints vare very sharp. 

Resume printing function, a run-out sensor, 
silent printing and a 4.3 inches color HD screen and has a carborundum glass printing platform, in short, its a kick-ass printer!

The Build

Currently not to much information about the printer released as its qwuite new, look forward seeing what mods become available. It cam ver well packed with a set of english instruction and part built so was quit eazy to pout together.

Took some pictures at difrent stages of the build might help somone giving this a go, our just if you want to know more, im sure there will be much more information on the internet in the future.

Thank you to the Lyndhurst STEM Club in New Jersey, their message;

Hope you’re having a great week so far! I’m a facility advisor from Lyndhurst STEM Club in New Jersey—our mission is to cultivate interest and passion for STEM within the girls of our community. I wanted to write you a little thank you note because you’ve played such a valuable role in our introductory program for 3D printing that we recently started to host! Your page, https://m0sce.co.uk/3d-printing/ has been an absolute treasure trove of information for the girls to learn from! Thank you so much!!

They also in turn recommended a link that could be a helpful contribution that could possibly help others learn more about 3D printing… Click to visit